PHP And MySQL Interview Questions

What are the differences between Get and post methods in form submitting.
give the case where we can use get and we can use post methods?

A:1
When to use GET or POST

The HTML 2.0 specification says, in section Form
Submission (and the HTML 4.0 specification repeats this with minor
stylistic changes):

–>If the processing of a form is idempotent
(i.e. it has no lasting observable effect on the state of the
world), then the form method should be GET. Many database searches
have no visible side-effects and make ideal applications of query
forms.
–
–>If the service associated with the processing of a form has side
effects (for example, modification of a database or subscription to
a service), the method should be POST.
How the form data is transmitted?

quotation from the HTML 4.0 specification

–> If the method is “get” - -, the user agent
takes the value of action, appends a ? to it, then appends the form
data set, encoded using the application/x-www-form-urlencoded
content type. The user agent then traverses the link to this URI. In
this scenario, form data are restricted to ASCII codes.
–> If the method is “post” –, the user agent conducts an HTTP post
transaction using the value of the action attribute and a message
created according to the content type specified by the enctype
attribute.
Quote from CGI FAQ

Firstly, the the HTTP protocol specifies
differing usages for the two methods. GET requests should always be
idempotent on the server. This means that whereas one GET request
might (rarely) change some state on the Server, two or more
identical requests will have no further effect.

This is a theoretical point which is also good
advice in practice. If a user hits “reload” on his/her browser, an
identical request will be sent to the server, potentially resulting
in two identical database or
guestbook entries, counter increments, etc. Browsers may reload a
GET URL automatically, particularly if cacheing is disabled (as is
usually the case with CGI output), but will typically prompt the
user before
re-submitting a POST request. This means you’re far less likely to
get inadvertently-repeated entries from POST.

GET is (in theory) the preferred method for
idempotent operations, such as querying a database, though it
matters little if you’re using a form. There is a further practical
constraint that many systems have built-in limits to the length of a
GET request they can handle: when the total size of a request (URL+params)
approaches or exceeds 1Kb, you are well-advised to use POST in any
case.

I would prefer POST when I don’t want the status to
be change when user resubmits. And GET
when it does not matter.

Q:2 Who is the father of PHP and explain the changes in PHP versions?
A:2 Rasmus Lerdorf is known as the father of PHP.PHP/FI 2.0 is an early and no longer supported version of PHP. PHP 3
is the successor to PHP/FI 2.0 and is a lot nicer. PHP 4 is the current
generation of PHP, which uses the
Zend engine
under the
hood. PHP 5 uses
Zend engine 2 which,
among other things, offers many additionalOOP features

Q:3 How can we submit a form without a submit button?
A:3 The main idea behind this is to use Java script submit() function in
order to submit the form without explicitly clicking any submit button.
You can attach the document.formname.submit() method to onclick,
onchange events of different inputs and perform the form submission. you
can even built a timer function where you can automatically submit the
form after xx seconds once the loading is done (can be seen in online
test sites).

Q:4 In how many ways we can retrieve the data in the result set of
MySQL using PHP?
A:4 You can do it by 4 Ways1. mysql_fetch_row.
2. mysql_fetch_array
3. mysql_fetch_object
4. mysql_fetch_assoc

Q:5 What is the difference between mysql_fetch_object and
mysql_fetch_array?
A:5 mysql_fetch_object() is similar tomysql_fetch_array(), with one difference -
an object is returned, instead of an array. Indirectly, that means that
you can only access the data by the field names, and not by their
offsets (numbers are illegal property names).

Q:6 What is the difference between $message and $$message?
A:6 It is a classic example of PHP’s variable variables. take the
following example.$message = “Mizan”;$$message = “is a moderator of PHPXperts.”;$message is a simple PHP variable that we are used to. But the
$$message is not a very familiar face. It creates a variable name $mizan
with the value “is a moderator of PHPXperts.” assigned. break it like
this${$message} => $mizanSometimes it is convenient to be able to have variable variable
names. That is, a variable name which can be set and used dynamically.

Q:7 How can we extract string ‘abc.com ‘ from a string ‘http://info@abc.com’
using regular expression of PHP?
A:7 preg_match(”/^http:\/\/.+@(.+)$/”,’http://info@abc.com’,$found);
echo $found[1];

Q:8 How can we create a database using PHP and MySQL?
A:8 We can create MySQL database with the use of
mysql_create_db(“Database Name”)

Q:9 What are the differences between require and include,
include_once and require_once?
A:9

The include() statement includes
and evaluates the specified file.The documentation below also applies to
require(). The two constructs
are identical in every way except how they handle
failure. include() produces a
Warning while require() results
in a Fatal Error. In other words, use
require() if you want a missing
file to halt processing of the page.
include() does not behave this way, the script will
continue regardless.

The include_once()
statement includes and evaluates the
specified file during the execution of
the script. This is a behavior similar
to the include()
statement, with the only difference
being that if the code from a file has
already been included, it will not be
included again. As the name suggests, it
will be included just once.include_once()
should be used in cases where the same
file might be included and evaluated
more than once during a particular
execution of a script, and you want to
be sure that it is included exactly once
to avoid problems with function
redefinitions, variable value
reassignments, etc.

require_once()
should be used in cases where the same
file might be included and evaluated
more than once during a particular
execution of a script, and you want to
be sure that it is included exactly once
to avoid problems with function
redefinitions, variable value
reassignments, etc.

Q:10 Can we use include (”abc.PHP”) two times in a PHP page “makeit.PHP”?
A:10 Yes we can use include() more than one time in any page though it is
not a very good practice.

Q:11 What are the different tables present in MySQL, which type of
table is generated when we are creating a table in the following syntax:
create table employee (eno int(2),ename varchar(10)) ?
A:11 Total 5 types of tables we can create
1. MyISAM
2. Heap
3. Merge
4. INNO DB
5. ISAM
MyISAM is the default storage engine as of MySQL 3.23 and as a result if
we do not specify the table name explicitly it will be assigned to the
default engine.

Q:12 Functions in IMAP, POP3 AND LDAP?
A:12 You can find these specific information in PHP Manual.

Q:13 How can I execute a PHP script using command line?
A:13 As of version 4.3.0, PHP supports a new SAPI type (Server
Application Programming Interface) named CLI which means Command Line
Interface. Just run the PHP CLI (Command Line Interface) program and
provide the PHP script file name as the command line argument. For
example, “php myScript.php”, assuming “php” is the command to invoke the
CLI program.
Be aware that if your PHP script was written for the Web CGI interface,
it may not execute properly in command line environment.

Q:14 Suppose your Zend engine supports the mode Then how can u
configure your PHP Zend engine to support mode ?
A:14 In php.ini file:
set
short_open_tag=on
to make PHP support

Q:15 Shopping cart online validation i.e. how can we configure Paypal,
etc.?
A:15 We can find the detail documentation about different paypal
integration process at the following site

PayPal PHP
SDK : http://www.paypaldev.org

Q:16 What is meant by nl2br()?
A:16 Inserts HTML line breaks (
) before all newlines in a string
string nl2br (string); Returns string with ” inserted before all
newlines. For example: echo nl2br(”god bless\n you”) will output “god
bless
you” to your browser.

Q:17 Draw the architecture of Zend engine?
A:17 The Zend Engine is the internal compiler and runtime engine used by
PHP4. Developed by Zeev Suraski and Andi Gutmans, the Zend Engine is an
abbreviation of their names. In the early days of PHP4, it worked as
follows:
The PHP script was loaded by the Zend Engine and compiled into Zend
opcode. Opcodes, short for operation codes, are low level binary
instructions. Then the opcode was executed and the HTML generated sent
to the client. The opcode was flushed from memory after execution.Today, there are a multitude of products and techniques to help you
speed up this process. In the following diagram, we show the how modern
PHP scripts work; all the shaded boxes are optional.
PHP Scripts are loaded into memory and compiled into Zend opcodes.

Q:18 What are the current versions of apache, PHP, and MySQL?
A:18 As of February, 2007 the current versions arePHP: php5.2.1
MySQL: MySQL 5.2
Apache: Apache 2.2.4Note: visit www.php.net,

http://dev.mysql.com/downloads/mysql/,
www.apache.org to get current
versions.

Q:19 What are the reasons for selecting lamp (Linux, apache, MySQL,
PHP) instead of combination of other software programs, servers and
operating systems?
A:19 All of those are open source resource. Security of Linux is very
very more than windows. Apache is a better server that IIS both in
functionality and security. MySQL is world most popular open source
database. PHP is more faster that asp or any other scripting language.

Q:20 How can we encrypt and decrypt a data present in a MySQL table
using MySQL?
A:20 AES_ENCRYPT () and AES_DECRYPT ()

Q:21 How can we encrypt the username and password using PHP?
A:21 The functions in this section perform encryption and decryption, and
compression and uncompression:

encryption decryption
AES_ENCRYT() AES_DECRYPT()
ENCODE() DECODE()
DES_ENCRYPT() DES_DECRYPT()
ENCRYPT() Not available
MD5() Not available
OLD_PASSWORD() Not available
PASSWORD() Not available
SHA() or SHA1() Not available
Not available UNCOMPRESSED_LENGTH()

Q:22 What are the features and advantages of object-oriented
programming?
A:22 One of the main advantages of OO programming is its ease of
modification; objects can easily be modified and added to a system there
by reducing maintenance costs. OO programming is also considered to be
better at modeling the real world than is procedural programming. It
allows for more complicated and flexible interactions. OO systems are
also easier for non-technical personnel to understand and easier for
them to participate in the maintenance and enhancement of a system
because it appeals to natural human cognition patterns.
For some systems, an OO approach can speed development time since many
objects are standard across systems and can be reused. Components that
manage dates, shipping, shopping carts, etc. can be purchased and easily
modified for a specific system

Q:23 What are the differences between procedure-oriented languages and
object-oriented languages?
A:23 Traditional programming has the following characteristics:Functions are written sequentially, so that a change in programming can
affect any code that follows it.
If a function is used multiple times in a system (i.e., a piece of code
that manages the date), it is often simply cut and pasted into each
program (i.e., a change log, order function, fulfillment system, etc).
If a date change is needed (i.e., Y2K when the code needed to be changed
to handle four numerical digits instead of two), all these pieces of
code must be found, modified, and tested.
Code (sequences of computer instructions) and data (information on which
the instructions operates on) are kept separate. Multiple sets of code
can access and modify one set of data. One set of code may rely on data
in multiple places. Multiple sets of code and data are required to work
together. Changes made to any of the code sets and data sets can cause
problems through out the system.Object-Oriented programming takes a radically different approach:Code and data are merged into one indivisible item – an object (the
term “component” has also been used to describe an object.) An object is
an abstraction of a set of real-world things (for example, an object may
be created around “date”) The object would contain all information and
functionality for that thing (A date
object it may contain labels like January, February, Tuesday, Wednesday.
It may contain functionality that manages leap years, determines if it
is a business day or a holiday, etc., See Fig. 1). Ideally, information
about a particular thing should reside in only one place in a system.
The information within an object is encapsulated (or hidden) from the
rest of the system.
A system is composed of multiple objects (i.e., date function, reports,
order processing, etc., See Fig 2). When one object needs information
from another object, a request is sent asking for specific information.
(for example, a report object may need to know what today’s date is and
will send a request to the date object) These requests are called
messages and each object has an interface that manages messages.
OO programming languages include features such as “class”, “instance”,
“inheritance”, and “polymorphism” that increase the power and
flexibility of an object.

Q:24 What is the use of friend function?
A:24 Sometimes a function is best shared among a number of different
classes. Such functions can be declared either as member functions of
one class or as global functions. In either case they can be set to be
friends of other classes, by using a friend specifier in the class that
is admitting them. Such functions can use all attributes of the class
which names them as a friend, as if they were themselves members of that
class.
A friend declaration is essentially a prototype for a member function,
but instead of requiring an implementation with the name of that class
attached by the double colon syntax, a global function or member
function of another class provides the match.

Q:25 What are the differences between public, private, protected,
static, transient, final and volatile?
A:25 Public: Public declared items can be accessed everywhere.
Protected: Protected limits access to inherited and parent
classes (and to the class that defines the item).
Private: Private limits visibility only to the class that defines
the item.
Static: A static variable exists only in a local function scope,
but it does not lose its value when program execution leaves this scope.
Final: Final keyword prevents child classes from overriding a
method by prefixing the definition with final. If the class itself is
being defined final then it cannot be extended.
transient: A transient variable is a variable that may not
be serialized.
volatile: a variable that might be concurrently modified by multiple
threads should be declared volatile. Variables declared to be volatile
will not be optimized by the compiler because their value can change at
any time.

Q:26 What are the different types of errors in PHP?
A:26 Three are three types of errors:1. Notices: These are trivial,
non-critical errors that PHP encounters while executing a script - for
example, accessing a variable that has not yet been defined. By default,
such errors are not displayed to the user at all - although, as you will
see, you can change this default behavior.2. Warnings: These are more serious errors - for example, attempting
to include() a file which does not exist. By default, these errors are
displayed to the user, but they do not result in script termination.3. Fatal errors: These are critical errors - for example,
instantiating an object of a non-existent class, or calling a
non-existent function. These errors cause the immediate termination of
the script, and PHP’s default behavior is to display them to the user
when they take place.

Q:27 What is the functionality of the function strstr and stristr?
A:27 strstr:

Returns part of haystack
string from the first occurrence of
needle to the end of
haystack.If needle is not found,
returns FALSE.

If needle is not a
string, it is converted to an integer and applied as the
ordinal value of a character.

This function is case-sensitive. For
case-insensitive searches, use
stristr().

Q:28 What are the differences between PHP 3 and PHP 4 and PHP 5?
A:28 Please read the release notes at
http://www.php.net.

Q:29 How can we convert asp pages to PHP pages?
A:29 there are lots of tools available for asp to PHP conversion. you can
search Google for that. the best one is available athttp://asp2php.naken.cc./

Q:30 What is the functionality of the function htmlentities?
A:30 Convert all applicable characters to HTML entities
This function is identical to htmlspecialchars() in all ways, except
with htmlentities(), all characters which have HTML character entity
equivalents are translated into these entities.

Q:31 How can we get second of the current time using date function?
A:31 $second = date(”s”);

Q:32 How can we convert the time zones using PHP?
A:32 By using date_default_timezone_get and
date_default_timezone_set function on PHP 5.1.0

// Discover what 8am in Tokyo relates to on the East Coast of the US

// Set the default timezone to Tokyo time:
date_default_timezone_set('Asia/Tokyo');

// Now generate the timestamp for that particular timezone, on Jan 1st, 2000
$stamp = mktime(8, 0, 0, 1, 1, 2000);

// Now set the timezone back to US/Eastern
date_default_timezone_set('US/Eastern');

// Output the date in a standard format (RFC1123), this will print:
// Fri, 31 Dec 1999 18:00:00 EST
echo '

', date(DATE_RFC1123, $stamp) ,'

';?>


Q:33 What is meant by urlencode and urldocode?
A:33 URLencode returns a string in which all non-alphanumeric characters
except -_. have been replaced with a percent (%)
sign followed by two hex digits and spaces encoded as plus (+)
signs. It is encoded the same way that the posted data from a WWW form
is encoded, that is the same way as in
application/x-www-form-urlencoded media type.

urldecode decodes any %##
encoding in the given string.

Q:34 What is the difference between the functions unlink and unset?
A:34 unlink() deletes the given file from the file system.
unset() makes a variable undefined.

Q:35 How can we register the variables into a session?
A:35 $_SESSION[’name’] = “Mizan”;

Q:36 How can we get the properties (size, type, width, height) of an
image using PHP image functions?
A:36 To know the Image type use exif_imagetype () function
To know the Image size use getimagesize () function
To know the image width use imagesx () function
To know the image height use imagesy() function t

Q:37 How can we get the browser properties using PHP?
A:37 By using
$_SERVER[’HTTP_USER_AGENT’]
variable.

Q:38 What is the maximum size of a file that can be uploaded using PHP
and how can we change this?
A:38 By default the maximum size is 2MB. and we can change the following
setup at php.iniupload_max_filesize = 2M

Q:39 How can we increase the execution time of a PHP script?
A:39 by changing the following setup at php.inimax_execution_time = 30
; Maximum execution time of each script, in seconds

Q:40 How can we take a backup of a MySQL table and how can we restore
it. ?
A:40 To backup: BACKUP TABLE tbl_name[,tbl_name…] TO
‘/path/to/backup/directory’
RESTORE TABLE tbl_name[,tbl_name…] FROM ‘/path/to/backup/directory’mysqldump: Dumping Table Structure and DataUtility to dump a database or a collection of database for backup or
for transferring the data to another SQL server (not necessarily a MySQL
server). The dump will contain SQL statements to create the table and/or
populate the table.
-t, –no-create-info
Don’t write table creation information (the CREATE TABLE statement).
-d, –no-data
Don’t write any row information for the table. This is very useful if
you just want to get a dump of the structure for a table!

Q:41 How can we optimize or increase the speed of a MySQL select
query?
A:41

* first of all instead of using select * from table1, use select
column1, column2, column3.. from table1
* Look for the opportunity to introduce index in the table you are
querying.
* use limit keyword if you are looking for any specific number of
rows from the result set.


Q:42 How many ways can we get the value of current session id?
A:42 session_id() returns the session id for the current session.

Q:43 How can we destroy the session, how can we unset the variable of
a session?
A:43 session_unregister — Unregister a global variable from the current
session
session_unset — Free all session variables

Q:44 How can we destroy the cookie?
A:44 Set the cookie in past.

Q:45 How many ways we can pass the variable through the navigation
between the pages?
A:45

* GET/QueryString
* POST


Q:46 What is the difference between ereg_replace() and eregi_replace()?
A:46 eregi_replace() function is identical to ereg_replace() except that
this ignores case distinction when matching alphabetic
characters.eregi_replace() function is identical to ereg_replace()
except that this ignores case distinction when matching alphabetic
characters.

Q:47 What are the different functions in sorting an array?
A:47 Sort(), arsort(),
asort(), ksort(),
natsort(), natcasesort(),
rsort(), usort(),
array_multisort(), and
uksort().

Q:48 How can we know the count/number of elements of an array?
A:48 2 ways
a) sizeof($urarray) This function is an alias of count()
b) count($urarray)

Q:49 What is the PHP predefined variable that tells the What types of
images that PHP supports?
A:49 Though i am not sure if this is wrong or not, With the exif
extension you are able to work with image meta data.

Q:50 How can I know that a variable is a number or not using a
JavaScript?
A:50 bool is_numeric ( mixed var)
Returns TRUE if var is a number or a numeric string, FALSE otherwise.or use isNaN(mixed var)The isNaN() function is used to check if a value is not a number.

Q:51 List out some tools through which we can draw E-R diagrams for
mysql.
A:51 Case Studio
Smart Draw

Q:52 How can I retrieve values from one database server and store them
in other database server using PHP?
A:52 we can always fetch from one database and rewrite to another. here
is a nice solution of it.$db1 = mysql_connect(”host”,”user”,”pwd”)
mysql_select_db(”db1″, $db1);
$res1 = mysql_query(”query”,$db1);$db2 = mysql_connect(”host”,”user”,”pwd”)
mysql_select_db(”db2″, $db2);
$res2 = mysql_query(”query”,$db2);At this point you can only fetch records from you previous ResultSet,
i.e $res1 - But you cannot execute new query in $db1, even if you
supply the link as because the link was overwritten by the new db.so at this point the following script will fail
$res3 = mysql_query(”query”,$db1); //this will failSo how to solve that?

take a look below.
$db1 = mysql_connect(”host”,”user”,”pwd”)
mysql_select_db(”db1″, $db1);
$res1 = mysql_query(”query”,$db1);

$db2 = mysql_connect(”host”,”user”,”pwd”, true)
mysql_select_db(”db2″, $db2);
$res2 = mysql_query(”query”,$db2);

So mysql_connect has another optional boolean parameter which
indicates whether a link will be created or not. as we connect to the
$db2 with this optional parameter set to ‘true’, so both link will
remain live.

now the following query will execute successfully.
$res3 = mysql_query(”query”,$db1);

Thanks goes to Hasan and Hasin for this solution.

Q:53 List out the predefined classes in PHP?
A:53 Directory
stdClass
__PHP_Incomplete_Class
exception
php_user_filter

Q:54 How can I make a script that can be bi-language (supports
English, German)?
A:54 You can maintain two separate language file for each of the
language. all the labels are putted in both language files as variables
and assign those variables in the PHP source. on runtime choose the
required language option.

Q:55 What are the difference between abstract class and interface?
A:55 Abstract class: abstract classes are the class where one or more
methods are abstract but not necessarily all method has to be abstract.
Abstract methods are the methods, which are declare in its class but not
define. The definition of those methods must be in its extending class.Interface: Interfaces are one type of class where all the methods are
abstract. That means all the methods only declared but not defined. All
the methods must be define by its implemented class.

Q:56 How can we send mail using JavaScript?
A:56 JavaScript does not have any networking capabilities as it is
designed to work on client site. As a result we can not send mails using
JavaScript. But we can call the client side mail protocol mailto
via JavaScript to prompt for an email to send. this requires the client
to approve it.

Q:57 How can we repair a MySQL table?
A:57 The syntex for repairing a MySQL table is
REPAIR TABLENAME, [TABLENAME, ], [Quick],[Extended]
This command will repair the table specified if the quick is given the
MySQL will do a repair of only the index tree if the extended is given
it will create index row by row

Q:58 What are the advantages of stored procedures, triggers, indexes?
A:58 A stored procedure is a set of SQL commands that can be compiled and
stored in the server. Once this has been done, clients don’t need to
keep re-issuing the entire query but can refer to the stored procedure.
This provides better overall performance because the query has to be
parsed only once, and less information needs to be sent between the
server and the client. You can also raise the conceptual level by having
libraries of functions in the server. However, stored procedures of
course do increase the load on the database server system, as more of
the work is done on the server side and less on the client (application)
side.Triggers will also be implemented. A trigger is effectively a type of
stored procedure, one that is invoked when a particular event occurs.
For example, you can install a stored procedure that is triggered each
time a record is deleted from a transaction table and that stored
procedure automatically deletes the corresponding customer from a
customer table when all his transactions are deleted.Indexes are used to find rows with specific column values quickly.
Without an index, MySQL must begin with the first row and then read
through the entire table to find the relevant rows. The larger the
table, the more this costs. If the table has an index for the columns in
question, MySQL can quickly determine the position to seek to in the
middle of the data file without having to look at all the data. If a
table has 1,000 rows, this is at least 100 times faster than reading
sequentially. If you need to access most of the rows, it is faster to
read sequentially, because this minimizes disk seeks.

Q:59 What is the maximum length of a table name, database name, and
fieldname in MySQL?
A:59 The following table describes the maximum length for each type of
identifier.

Identifier Maximum Length
(bytes)
Database 64
Table 64
Column 64
Index 64
Alias 255

There are some restrictions on the characters that may appear in
identifiers:

Q:60 How many values can the SET function of MySQL take?
A:60 MySQL set can take zero or more values but at the maximum it can
take 64 values

Q:61 What are the other commands to know the structure of table using
MySQL commands except explain command?
A:61 describe Table-Name;

Q:62 How many tables will create when we create table, what are they?
A:62 The ‘.frm’ file stores the table definition.
The data file has a ‘.MYD’ (MYData) extension.
The index file has a ‘.MYI’ (MYIndex) extension,

Q:63 What is the purpose of the following files having extensions 1) .frm
2) .myd 3) .myi? What do these files contain?
A:63 In MySql, the default table type is MyISAM.
Each MyISAM table is stored on disk in three files. The files have names
that begin with the table name and have an extension to indicate the
file type.
The ‘.frm’ file stores the table definition.
The data file has a ‘.MYD’ (MYData) extension.
The index file has a ‘.MYI’ (MYIndex) extension,

Q:64 What is maximum size of a database in MySQL?
A:64 If the operating system or filesystem places a limit on the number
of files in a directory, MySQL is bound by that constraint.The efficiency of the operating system in handling large numbers of
files in a directory can place a practical limit on the number of tables
in a database. If the time required to open a file in the directory
increases significantly as the number of files increases, database
performance can be adversely affected.
The amount of available disk space limits the number of tables.
MySQL 3.22 had a 4GB (4 gigabyte) limit on table size. With the MyISAM
storage engine in MySQL 3.23, the maximum table size was increased to
65536 terabytes (2567 – 1 bytes). With this larger allowed table size,
the maximum effective table size for MySQL databases is usually
determined by operating system constraints on file sizes, not by MySQL
internal limits.The InnoDB storage engine maintains InnoDB tables within a tablespace
that can be created from several files. This allows a table to exceed
the maximum individual file size. The tablespace can include raw disk
partitions, which allows extremely large tables. The maximum tablespace
size is 64TB.
The following table lists some examples of operating system file-size
limits. This is only a rough guide and is not intended to be definitive.
For the most up-to-date information, be sure to check the documentation
specific to your operating system.
Operating System File-size LimitLinux 2.2-Intel 32-bit 2GB (LFS: 4GB)
Linux 2.4+ (using ext3 filesystem) 4TB
Solaris 9/10 16TB
NetWare w/NSS filesystem 8TB
Win32 w/ FAT/FAT32 2GB/4GB
Win32 w/ NTFS 2TB (possibly larger)
MacOS X w/ HFS+ 2TB

Q:65 Give the syntax of Grant and Revoke commands?
A:65 The generic syntax for grant is as following
> GRANT [rights] on [database/s] TO [username@hostname] IDENTIFIED BY
[password]
now rights can be
a) All privileges
b) combination of create, drop, select, insert, update and delete etc.We can grant rights on all databse by using *.* or some specific
database by database.* or a specific table by database.table_name
username@hotsname can be either username@localhost, username@hostname
and username@%
where hostname is any valid hostname and % represents any name, the *.*
any condition
password is simply the password of userThe generic syntax for revoke is as following
> REVOKE [rights] on [database/s] FROM [username@hostname]
now rights can be as explained above
a) All privileges
b) combination of create, drop, select, insert, update and delete etc.
username@hotsname can be either username@localhost, username@hostname
and username@%
where hostname is any valid hostname and % represents any name, the *.*
any condition

Q:66 Explain Normalization concept?
A:66 The normalization process involves getting our data to conform to
three progressive normal forms, and a higher level of normalization
cannot be achieved until the previous levels have been achieved (there
are actually five normal forms, but the last two are mainly academic and
will not be discussed).First Normal FormThe First Normal Form (or 1NF) involves removal of redundant data
from horizontal rows. We want to ensure that there is no duplication of
data in a given row, and that every column stores the least amount of
information possible (making the field atomic).Second Normal FormWhere the First Normal Form deals with redundancy of data across a
horizontal row, Second Normal Form (or 2NF) deals with redundancy of
data in vertical columns. As stated earlier, the normal forms are
progressive, so to achieve Second Normal Form, your tables must already
be in First Normal Form.Third Normal Form

I have a confession to make; I do not often use Third Normal Form. In
Third Normal Form we are looking for data in our tables that is not
fully dependant on the primary key, but dependant on another value in
the table

Q:67 How can we find the number of rows in a table using MySQL?
A:67 Use this for mysql
>SELECT COUNT(*) FROM table_name;

Q:68 How can we find the number of rows in a result set using PHP?
A:68 $result = mysql_query($sql, $db_link);
$num_rows = mysql_num_rows($result);
echo “$num_rows rows found”;

Q:69 How many ways we can we find the current date using MySQL?
A:69 SELECT CURDATE();
CURRENT_DATE() = CURDATE()
for time use
SELECT CURTIME();
CURRENT_TIME() = CURTIME()

Q:70 What are the advantages and disadvantages of Cascading Style
Sheets?
A:70 External Style SheetsAdvantagesCan control styles for multiple documents at once. Classes can be
created for use on multiple HTML element types in many documents.
Selector and grouping methods can be used to apply styles under complex
contextsDisadvantagesAn extra download is required to import style information for each
document The rendering of the document may be delayed until the external
style sheet is loaded Becomes slightly unwieldy for small quantities of
style definitionsEmbedded Style Sheets

Advantages

Classes can be created for use on multiple tag types in the document.
Selector and grouping methods can be used to apply styles under complex
contexts. No additional downloads necessary to receive style information

Disadvantages

This method can not control styles for multiple documents at once

Inline Styles

Advantages

Useful for small quantities of style definitions. Can override other
style specification methods at the local level so only exceptions need
to be listed in conjunction with other style methods

Disadvantages

Does not distance style information from content (a main goal of
SGML/HTML). Can not control styles for multiple documents at once.
Author can not create or control classes of elements to control multiple
element types within the document. Selector grouping methods can not be
used to create complex element addressing scenarios

Q:71 What type of inheritance that PHP supports?
A:71 In PHP an extended class is always dependent on a single base class,
that is, multiple inheritance is not supported. Classes are extended
using the keyword ‘extends’.

Q:72 What is the difference between Primary Key and
Unique key?
A:72 Primary Key: A column in a table whose values uniquely identify the
rows in the table. A primary key value cannot be NULL.

Unique Key: Unique Keys are used to uniquely identify each row in the
table. There can be one and only one row for each unique key value. So
NULL can be a unique key.There can be only one primary key for a table but there can be more
than one unique for a table.


Q:73 The structure of table view buyers is as follows:

Field Type Null Key Default Extra
user_pri_id int(15) PRI null auto_increment
userid varchar(10) YES null

the value of user_pri_id the last row 999 then What will happen in
the following conditions?

Condition1: Delete all the rows and insert another row then.
What is the starting value for this auto incremented field user_pri_id ,
Condition2: Delete the last row(having the field value 999) and
insert another row then. What is the value for this auto incremented
field user_pri_id
A:73 In both cases let the value for auto increment field be n then next
row will have value n+1 i.e. 1000

Q:74 What are the advantages/disadvantages of MySQL and PHP?
A:74 Both of them are open source software (so free of cost), support
cross platform. php is faster then ASP and JSP.

Q:75 What is the difference between GROUP BY and ORDER BY in Sql?
A:75 ORDER BY [col1],[col2],…,[coln]; Tels DBMS according to what columns
it should sort the result. If two rows will hawe the same value in col1
it will try to sort them according to col2 and so on.GROUP BY
[col1],[col2],…,[coln]; Tels DBMS to group results with same value of
column col1. You can use COUNT(col1), SUM(col1), AVG(col1) with it, if
you want to count all items in group, sum all values or view average

Q:76 What is the difference between char and varchar data types?
A:76 Set char to occupy n bytes and it will take n bytes even if u r
storing a value of n-m bytes
Set varchar to occupy n bytes and it will take only the required space
and will not use the n bytes
eg. name char(15) will waste 10 bytes if we store ‘mizan’, if each char
takes a byte
eg. name varchar(15) will just use 5 bytes if we store ‘mizan’, if each
char takes a byte. rest 10 bytes will be free.

Q:77 What is the functionality of md5 function in PHP?
A:77 Calculate the md5 hash of a string. The hash is a 32-character
hexadecimal number. I use it to generate keys which I use to identify
users etc. If I add random no techniques to it the md5 generated now
will be totally different for the same string I am using.

Q:78 How can I load data from a text file into a table?
A:78 you can use LOAD DATA INFILE file_name; syntax to load data
from a text file. but you have to make sure thata) data is delimited
b) columns and data matched correctly

Q:79 How can we know the number of days between two given dates using
MySQL?
A:79 SELECT DATEDIFF(’2007-03-07′,’2005-01-01′);

Q:80 How can we know the number of days between two given dates using
PHP?
A:80 $date1 = date(’Y-m-d’);
$date2 = ‘2006-08-15′;
$days = (strtotime($date1) - strtotime($date2)) / (60 * 60 * 24);