Networking Interview Questions

What are the two types of transmission technology available?
(i) Broadcast and (ii) point-to-point

What is subnet?
A generic term for section of a large networks usually separated by a bridge or router.

Difference between the communication and transmission.
Transmission is a physical movement of information and concern issues like bit polarity, synchronisation, clock etc.
Communication means the meaning full exchange of information between two communication media.

What are the possible ways of data exchange?
(i) Simplex (ii) Half-duplex (iii) Full-duplex.

What is SAP?
Series of interface points that allow other computers to communicate with the other layers of network protocol stack.

What do you meant by "triple X" in Networks?
The function of PAD (Packet Assembler Disassembler) is described in a document known as X.3. The standard protocol has been defined between the terminal and the PAD, called X.28; another standard protocol exists between hte PAD and the network, called X.29. Together, these three recommendations are often called "triple X"

What is frame relay, in which layer it comes?
Frame relay is a packet switching technology. It will operate in the data link layer.

What is terminal emulation, in which layer it comes?
Telnet is also called as terminal emulation. It belongs to application layer.

What is Beaconing?
The process that allows a network to self-repair networks problems. The stations on the network notify the other stations on the ring when they are not receiving the transmissions. Beaconing is used in Token ring and FDDI networks.

What is redirector?
Redirector is software that intercepts file or prints I/O requests and translates them into network requests. This comes under presentation layer.

What is NETBIOS and NETBEUI?
NETBIOS is a programming interface that allows I/O requests to be sent to and received from a remote computer and it hides the networking hardware from applications.
NETBEUI is NetBIOS extended user interface. A transport protocol designed by microsoft and IBM for the use on small subnets.

What is RAID?
A method for providing fault tolerance by using multiple hard disk drives.

What is passive topology?
When the computers on the network simply listen and receive the signal, they are referred to as passive because they don’t amplify the signal in any way. Example for passive topology - linear bus.

What is Brouter?
Hybrid devices that combine the features of both bridges and routers.

What is cladding?
A layer of a glass surrounding the center fiber of glass inside a fiber-optic cable.

What is point-to-point protocol
A communications protocol used to connect computers to remote networking services including Internet service providers.

How Gateway is different from Routers?
A gateway operates at the upper levels of the OSI model and translates information between two completely different network architectures or data formats

What is attenuation?
The degeneration of a signal over distance on a network cable is called attenuation.

What is MAC address?
The address for a device as it is identified at the Media Access Control (MAC) layer in the network architecture. MAC address is usually stored in ROM on the network adapter card and is unique.

Difference between bit rate and baud rate.
Bit rate is the number of bits transmitted during one second whereas baud rate refers to the number of signal units per second that are required to represent those bits.
baud rate = bit rate / N
where N is no-of-bits represented by each signal shift.

What is Bandwidth?
Every line has an upper limit and a lower limit on the frequency of signals it can carry. This limited range is called the bandwidth.

What are the types of Transmission media?
Signals are usually transmitted over some transmission media that are broadly classified in to two categories.
Guided Media:
These are those that provide a conduit from one device to another that include twisted-pair, coaxial cable and fiber-optic cable. A signal traveling along any of these media is directed and is contained by the physical limits of the medium. Twisted-pair and coaxial cable use metallic that accept and transport signals in the form of electrical current. Optical fiber is a glass or plastic cable that accepts and transports signals in the form of light.
Unguided Media:
This is the wireless media that transport electromagnetic waves without using a physical conductor. Signals are broadcast either through air. This is done through radio communication, satellite communication and cellular telephony.

What is Project 802?
It is a project started by IEEE to set standards to enable intercommunication between equipment from a variety of manufacturers. It is a way for specifying functions of the physical layer, the data link layer and to some extent the network layer to allow for interconnectivity of major LAN
protocols.
It consists of the following:
802.1 is an internetworking standard for compatibility of different LANs and MANs across protocols.
802.2 Logical link control (LLC) is the upper sublayer of the data link layer which is non-architecture-specific, that is remains the same for all IEEE-defined LANs.
Media access control (MAC) is the lower sublayer of the data link layer that contains some distinct modules each carrying proprietary information specific to the LAN product being used. The modules are Ethernet LAN (802.3), Token ring LAN (802.4), Token bus LAN (802.5).
802.6 is distributed queue dual bus (DQDB) designed to be used in MANs.

What is Protocol Data Unit?
The data unit in the LLC level is called the protocol data unit (PDU). The PDU contains of four fields a destination service access point (DSAP), a source service access point (SSAP), a control field and an information field. DSAP, SSAP are addresses used by the LLC to identify the protocol stacks on the receiving and sending machines that are generating and using the data. The control field specifies whether the PDU frame is a information frame (I - frame) or a supervisory frame (S - frame) or a unnumbered frame (U - frame).

What are the different type of networking / internetworking devices?
Repeater:
Also called a regenerator, it is an electronic device that operates only at physical layer. It receives the signal in the network before it becomes weak, regenerates the original bit pattern and puts the refreshed copy back in to the link.
Bridges:
These operate both in the physical and data link layers of LANs of same type. They divide a larger network in to smaller segments. They contain logic that allow them to keep the traffic for each segment separate and thus are repeaters that relay a frame only the side of the segment containing the intended recipent and control congestion.
Routers:
They relay packets among multiple interconnected networks (i.e. LANs of different type). They operate in the physical, data link and network layers. They contain software that enable them to determine which of the several possible paths is the best for a particular transmission.
Gateways:
They relay packets among networks that have different protocols (e.g. between a LAN and a WAN). They accept a packet formatted for one protocol and convert it to a packet formatted for another protocol before forwarding it. They operate in all seven layers of the OSI model.

What is ICMP?
ICMP is Internet Control Message Protocol, a network layer protocol of the TCP/IP suite used by hosts and gateways to send notification of datagram problems back to the sender. It uses the echo test / reply to test whether a destination is reachable and responding. It also handles both control and error messages.

What are the data units at different layers of the TCP / IP protocol suite?
The data unit created at the application layer is called a message, at the transport layer the data unit created is called either a segment or an user datagram, at the network layer the data unit created is called the datagram, at the data link layer the datagram is encapsulated in to a frame and finally transmitted as signals along the transmission media.

What is difference between ARP and RARP?
The address resolution protocol (ARP) is used to associate the 32 bit IP address with the 48 bit physical address, used by a host or a router to find the physical address of another host on its network by sending a ARP query packet that includes the IP address of the receiver.
The reverse address resolution protocol (RARP) allows a host to discover its Internet address when it knows only its physical address.

What is the minimum and maximum length of the header in the TCP segment and IP datagram?
The header should have a minimum length of 20 bytes and can have a maximum length of 60 bytes.

What is the range of addresses in the classes of internet addresses?
Class A 0.0.0.0 - 127.255.255.255
Class B 128.0.0.0 - 191.255.255.255
Class C 192.0.0.0 - 223.255.255.255
Class D 224.0.0.0 - 239.255.255.255
Class E 240.0.0.0 - 247.255.255.255

Basic Java Interview Questions

1. What is the difference between private, protected, and public?

These keywords are for allowing privileges to components such as java methods and variables.
Public: accessible to all classes
Private: accessible only to the class to which they belong
Protected: accessible to the class to which they belong and any subclasses.
Access specifiers are keywords that determines the type of access to the member of a class. These are:
* Public
* Protected
* Private
* Defaults

2. What's the difference between an interface and an abstract class? Also discuss the similarities. (Very Important)

Abstract class is a class which contain one or more abstract methods, which has to be implemented by sub classes. Interface is a Java Object containing method declaration and doesn't contain implementation. The classes which have implementing the Interfaces must provide the method definition for all the methods
Abstract class is a Class prefix with a abstract keyword followed by Class definition. Interface is a Interface which starts with interface keyword.
Abstract class contains one or more abstract methods. where as Interface contains all abstract methods and final declarations
Abstract classes are useful in a situation that Some general methods should be implemented and specialization behavior should be implemented by child classes. Interfaces are useful in a situation that all properties should be implemented.

Differences are as follows:

* Interfaces provide a form of multiple inheritance. A class can extend only one other class.
* Interfaces are limited to public methods and constants with no implementation. Abstract classes can have a partial implementation, protected parts, static methods, etc.
* A Class may implement several interfaces. But in case of abstract class, a class may extend only one abstract class.
* Interfaces are slow as it requires extra indirection to to find corresponding method in in the actual class. Abstract classes are fast.

Similarities:

* Neither Abstract classes or Interface can be instantiated.

How to define an Abstract class?
A class containing abstract method is called Abstract class. An Abstract class can't be instantiated.
Example of Abstract class:

abstract class testAbstractClass {
protected String myString;
public String getMyString() {
return myString;
}
public abstract string anyAbstractFunction();
}

How to define an Interface?
Answer: In Java Interface defines the methods but does not implement them. Interface can include constants. A class that implements the interfaces is bound to implement all the methods defined in Interface.
Example of Interface:

public interface sampleInterface {
public void functionOne();
public long CONSTANT_ONE = 1000;
}

3. Question: How you can force the garbage collection?

Garbage collection automatic process and can't be forced. You could request it by calling System.gc(). JVM does not guarantee that GC will be started immediately.

Garbage collection is one of the most important feature of Java, Garbage collection is also called automatic memory management as JVM automatically removes the unused variables/objects (value is null) from the memory. User program can't directly free the object from memory, instead it is the job of the garbage collector to automatically free the objects that are no longer referenced by a program. Every class inherits finalize() method from java.lang.Object, the finalize() method is called by garbage collector when it determines no more references to the object exists. In Java, it is good idea to explicitly assign null into a variable when no more in use. I Java on calling System.gc() and Runtime.gc(), JVM tries to recycle the unused objects, but there is no guarantee when all the objects will garbage collected.

4. What's the difference between constructors and normal methods?

Constructors must have the same name as the class and can not return a value. They are only called once while regular methods could be called many times and it can return a value or can be void.

5. Can you call one constructor from another if a class has multiple constructors

Yes. Use this() to call a constructor from an other constructor.

6. Explain the usage of Java packages.

This is a way to organize files when a project consists of multiple modules. It also helps resolve naming conflicts when different packages have classes with the same names. Packages access level also allows you to protect data from being used by the non-authorized classes.

7. Explain in your own words the "bottom line" benefits of the use of an interface.

The interface makes it possible for a method in one class to invoke methods on objects of other classes, without the requirement to know the true class of those objects, provided that those objects are all instantiated from classes that implement one or more specified interfaces. In other words, objects of classes that implement specified interfaces can be passed into methods of other objects as the generic type Object, and the methods of the other objects can invoke methods on the incoming objects by first casting them as the interface type.

8. What are some advantages and disadvantages of Java Sockets?

Some advantages of Java Sockets:
Sockets are flexible and sufficient. Efficient socket based programming can be easily implemented for general communications. Sockets cause low network traffic. Unlike HTML forms and CGI scripts that generate and transfer whole web pages for each new request, Java applets can send only necessary updated information.

Some disadvantages of Java Sockets:
Security restrictions are sometimes overbearing because a Java applet running in a Web browser is only able to establish connections to the machine where it came from, and to nowhere else on the network Despite all of the useful and helpful Java features, Socket based communications allows only to send packets of raw data between applications. Both the client-side and server-side have to provide mechanisms to make the data useful in any way.

9. Explain the usage of the keyword transient?

Transient keyword indicates that the value of this member variable does not have to be serialized with the object. When the class will be de-serialized, this variable will be initialized with a default value of its data type (i.e. zero for integers).

10. What's the difference between the methods sleep() and wait()

The code sleep(1000); puts thread aside for exactly one second. The code wait(1000), causes a wait of up to one second. A thread could stop waiting earlier if it receives the notify() or notifyAll() call. The method wait() is defined in the class Object and the method sleep() is defined in the class Thread.

11. What would you use to compare two String variables - the operator == or the method equals()?

I'd use the method equals() to compare the values of the Strings and the == to check if two variables point at the same instance of a String object.

12. Why would you use a synchronized block vs. synchronized method?

Synchronized blocks place locks for shorter periods than synchronized methods.

13. What access level do you need to specify in the class declaration to ensure that only classes from the same directory can access it?

You do not need to specify any access level, and Java will use a default package access level.

14. Can an inner class declared inside of a method access local variables of this method?

It's possible if these variables are final.

15. What can go wrong if you replace && with & in the following code:
String a=null; if (a!=null && a.length()>10) {...}

A single ampersand here would lead to a NullPointerException.

16. What's the main difference between a Vector and an ArrayList?

Java Vector class is internally synchronized and ArrayList is not synchronized.

17. Describe the wrapper classes in Java.

Wrapper class is wrapper around a primitive data type. An instance of a wrapper class contains, or wraps, a primitive value of the corresponding type.

Following table lists the primitive types and the corresponding wrapper classes:
Primitive Wrapper
boolean - java.lang.Boolean
byte - java.lang.Byte
char - java.lang.Character
double - java.lang.Double
float - java.lang.Float
int - java.lang.Integer
long - java.lang.Long
short - java.lang.Short
void - java.lang.Void

18. How could Java classes direct program messages to the system console, but error messages, say to a file?

The class System has a variable out that represents the standard output, and the variable err that represents the standard error device. By default, they both point at the system console. This how the standard output could be re-directed:
Stream st = new Stream(new FileOutputStream("output.txt")); System.setErr(st); System.setOut(st);

19. How do you know if an explicit object casting is needed?

If you assign a superclass object to a variable of a subclass's data type, you need to do explicit casting. For example:
Object a; Customer b; b = (Customer) a;

20. When you assign a subclass to a variable having a supeclass type, the casting is performed automatically. Can you write a Java class that could be used both as an applet as well as an application?

Yes. Add a main() method to the applet.

21. If a class is located in a package, what do you need to change in the OS environment to be able to use it?

You need to add a directory or a jar file that contains the package directories to the CLASSPATH environment variable. Let's say a class Employee belongs to a package com.xyz.hr; and is located in the file c:\dev\com\xyz\hr\Employee.javIn this case, you'd need to add c:\dev to the variable CLASSPATH. If this class contains the method main(), you could test it from a command prompt window as follows:
c:\>java com.xyz.hr.Employee

22. What's the difference between J2SDK 1.5 and J2SDK 5.0?

There's no difference, Sun Microsystems just re-branded this version.

23. Does it matter in what order catch statements for FileNotFoundException and IOExceptipon are written?

Yes, it does. The FileNoFoundException is inherited from the IOException. Exception's subclasses have to be caught first.

24. Name the containers which uses Border Layout as their default layout?

Containers which uses Border Layout as their default are: window, Frame and Dialog classes.

25. You are planning to do an indexed search in a list of objects. Which of the two Java collections should you use:
ArrayList or LinkedList?

ArrayList

26. When should the method invokeLater()be used?

This method is used to ensure that Swing components are updated through the event-dispatching thread.

27. How can a subclass call a method or a constructor defined in a superclass?

Use the following syntax: super.myMethod(); To call a constructor of the superclass, just write super(); in the first line of the subclass's constructor.

28. What do you understand by Synchronization?

Synchronization is a process of controlling the access of shared resources by the multiple threads in such a manner that only one thread can access one resource at a time. In non synchronized multithreaded application, it is possible for one thread to modify a shared object while another thread is in the process of using or updating the object's value. Synchronization prevents such type of data corruption.
E.g. Synchronizing a function:
public synchronized void Method1 () {
// Appropriate method-related code.
}
E.g. Synchronizing a block of code inside a function:
public myFunction (){
synchronized (this) {
// Synchronized code here.
}
}

29. What's the difference between a queue and a stack?

Stacks works by last-in-first-out rule (LIFO), while queues use the FIFO rule

30. You can create an abstract class that contains only abstract methods. On the other hand, you can create an interface that declares the same methods. So can you use abstract classes instead of interfaces?

Sometimes. But your class may be a descendent of another class and in this case the interface is your only option.

31. If you're overriding the method equals() of an object, which other method you might also consider?

hashCode()

32. What is Collection API?

The Collection API is a set of classes and interfaces that support operation on collections of objects. These classes and interfaces are more flexible, more powerful, and more regular than the vectors, arrays, and hashtables if effectively replaces.
Example of classes: HashSet, HashMap, ArrayList, LinkedList, TreeSet and TreeMap.
Example of interfaces: Collection, Set, List and Map.

33. How would you make a copy of an entire Java object with its state?

Have this class implement Cloneable interface and call its method clone().

34. How can you minimize the need of garbage collection and make the memory use more effective?

Use object pooling and weak object references.

35. There are two classes: A and B. The class B need to inform a class A when some important event has happened. What Java technique would you use to implement it?

If these classes are threads I'd consider notify() or notifyAll(). For regular classes you can use the Observer interface.

36. Explain the Encapsulation principle.

Encapsulation is a process of binding or wrapping the data and the codes that operates on the data into a single entity. This keeps the data safe from outside interface and misuse. One way to think about encapsulation is as a protective wrapper that prevents code and data from being arbitrarily accessed by other code defined outside the wrapper.

37. Explain the Inheritance principle.

Inheritance is the process by which one object acquires the properties of another object.

38. Explain the Polymorphism principle.

The meaning of Polymorphism is something like one name many forms. Polymorphism enables one entity to be used as as general category for different types of actions. The specific action is determined by the exact nature of the situation. The concept of polymorphism can be explained as "one interface, multiple methods".
From a practical programming viewpoint, polymorphism exists in three distinct forms in Java:

* Method overloading
* Method overriding through inheritance
* Method overriding through the Java interface

39. Is Iterator a Class or Interface? What is its use?

Iterator is an interface which is used to step through the elements of a Collection.

40. Explain the user defined Exceptions?

User defined Exceptions are the separate Exception classes defined by the user for specific purposed. An user defined can created by simply sub-classing it to the Exception class. This allows custom exceptions to be generated (using throw) and caught in the same way as normal exceptions.
Example:

class myCustomException extends Exception {
/ The class simply has to exist to be an exception
}


41. What is OOPS?

OOP is the common abbreviation for Object-Oriented Programming.
There are three main principals of oops which are called Polymorphism, Inheritance and Encapsulation.

39. Read the following program:

public class test {
public static void main(String [] args) {
int x = 3;
int y = 1;
if (x = y)
System.out.println("Not equal");
else
System.out.println("Equal");
}
}

What is the result?
The output is “Equal”
B. The output in “Not Equal”
C. An error at " if (x = y)" causes compilation to fall.
D. The program executes but no output is show on console.
Answer: C
Answer: Transient variable can't be serialize. For example if a variable is declared as transient in a Serializable class and the class is written to an ObjectStream, the value of the variable can't be written to the stream instead when the class is retrieved from the ObjectStream the value of the variable becomes null.